Select Page
Vertical Lifeline Systems,Capital Safety Vertical Lifelines 
 

Capital Safety DBI SALA Lad-Saf Flexible Cable Ladder Lifeline System

With DBI-SALA’s Lad-Saf® Flexible Cable Ladder Safety Systems you are always assured of complete safety and security when climbing fixed ladders on poles, towers, tanks, etc. Every system is engineered to your specific requirements while meeting or exceeding global standards – including OSHA, ANSI, CSA and CE – so the device can be used anywhere in the world. The design allows the shuttle to remain attached to the user to eliminate the potential for dropping and creating Lost Time Incidents or causing potential injury.

Lad Saf

Lad-Saf Flexible Cable Ladder Lifeline System

PDF Icon
Capital Safety DBI SALA Railon 90 Ladder Lifeline System

The Railok 90 vertical rail system can be used in multiple sectors in many different locations.  Ladder Rung Supports may be used to reinforce hollow ladder rungs to reduce crushing or collapsing of the rung due to tightening of the Ladder Safety System Clamps, and to generally strengthen the rung. The ladder and its connection to the structure must be evaluated by a qualified person to determine if the load requirements for the system are met. Refer to individual ladder safety system instructions for system load requirements.  Ladder Rung Supports are available in various shapes and lengths. For best results, select a Ladder Rung Support size that will fit closely with the inside dimensions of the rung. The Rung Support must have sufficient length extending on either side of the Ladder Side Rails to install Rung Support fasteners.

Railok 90

Railon 90 Ladder Lifeline System

PDF Icon
Capital Safety DBI SALA SSB Climb Assist Ladder Lifeline System

The DBI‑SALA Climb Assist/Fall Arrest System is a component used in a personal fall arrest system (PFAS). This equipment is to be used in situations where worker mobility and fall protection is needed inspection work, general construction, maintenance work, oil production, confined space work, etc. The DBI‑SALA Climb Assist/Fall Arrest System can also provide assistance in climbing fixed ladders.

This equipment is used as part of a complete fall arrest system. Such systems typically include a full body harness, anchorage connector (i.e. carabiner) and the Climb Assist/Fall Arrest System. This type of system is used where a fall hazard exists.

SSB Climb Assist1

SSB Climb Assist Ladder Lifeline System

 PDF Icon
Capital Safety DBI SALA Rope Grabs & Lifelines
  • Hands-free mobile type Energy absorbing 5/8″ diameter rope grab – revolutionary design is less sensitive to rope variations.
  • 50 ft. polyester/polypropylene lifeline
  • Flexible counterweight to enhance system performance
  • 3 ft EZ Stop® II shock absorbing lanyard for added safety
  • 3 ft tie-off adapter for fast easy installation
  • Carrying bag to keep items neat and clean while not in use
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z 359

Rope and Grab Lines

Rope Grabs & Lifelines

PDF Icon
Capital Safety DBI SALA Powered Climb Assist Ladder Lifeline System

Extremely tall or lengthy structures are often conducive to an assisted system which provides weight relief to reduce worker fatigue and improve climbing longevity.  The Powered Climb Assist System from DBI-SALA® is specifically designed to provide assistance for those who climb the internal ladders of wind energy towers.

  • Designed to be used in conjunction with a ladder safety system, such as the LadSaf™ vertical system with sleeve
  • Motor control unit provides five discrete speed level settings
  • System provides a unique “adaptive” motor control system that adjusts to environmental conditions and climbing speed
  • Personalized system adjustment of 55-120 lbs. (25-55 kg) for a wide range of climbing styles and user weights for effortless ascent and descent
  • Plug-n-play portable motor control unit design enables simple installation to cable tensioning unit—just plug the unit into the power outlet and you’re ready to climb!
  • System accommodates a power supply range of 110 Vac – 240 Vac, 50-60 Hz—
  • Optional power cords available to match receptacles, ensuring global compatibility
  • 20-lb. portable motor control unit, easily transported to support multiple systems and towers
  • System includes top and bottom pulley assemblies, wire cable, wire cable grip, motor control assembly and cable tensioning system

Power Climb Assist1

Powered Climb Assist Ladder Lifeline System

PDF Icon