|
| |
|
GME
Bedding Boxes |
|
BACK |
 |
 |
Light Duty Bedding Boxes
The BL4, BL7, and BL9 Light Duty are designed for use with lighter
machinery. The top frame is further strengthened by an inner core of
hardwood. It is constructed of 3/16" plate at the ends and sides, and 3/8"
plate on the bottom. Wear strip on bottom and 44" profile is standard on
these boxes.
STANDARD DUTY BEDDING BOXES
BS5, BS7, BS8, and BS9. The Standard unit features rugged steel welded
construction, fully reinforced at all points of stress. The top frame is
further strengthened by an inner core of hardwood. This unit is
constructed of 1/4" sides and ends, and the bottom surface is smooth;
fabricated of 1/2" steel plate, with wear strips on the inside to guard
against damage by bucket teeth. Low 44" profile allows dump truck to fill
the box from either end or side.
|
 | Pulling the Bedding Box when it is in front of the excavator. |
| Walking the box when it is behind excavator. |
| Lifting the box when it is empty, for positioning on other side
of trench, by wedging bucket between bar and box. |
| Easy-Lift Boxes include Apparatus A & B |
| EZ boxes are constructed of 1/4" plate on sides and ends
and 1/2" plate on the bottom. |
| All stress points are fully welded for maximum strength |
|
 |
|
BEDDING
BOXES |
|
MODEL NO. |
CAPACITY |
WT. LBS. |
WIDTH |
LENGTH |
HEIGHT |
|
LITE
DUTY BEDDING BOXES |
| BL-4 |
4 CYDS |
3,228 |
54" |
13' |
44" |
| BL-7 |
7 CYDS |
4,480 |
60" |
16' |
44" |
| BL-9 |
9 CYDS |
5,061 |
72" |
16' |
44" |
|
STANDARD
DUTY BEDDING BOXES |
| BS-5 |
5 CYDS |
4,423 |
60" |
13' |
44" |
| BS-7 |
7 CYDS |
5,078 |
60" |
16' |
44" |
| BS-8 |
8 CYDS |
5,133 |
66" |
16' |
44" |
| BS-9 |
9 CYDS |
5,608 |
72" |
16' |
44" |
| BS-12 |
12 CYDS |
6,396 |
96" |
16' |
44" |
|
HEAVY
DUTY BEDDING BOXES |
| BH-9 |
9 CYDS |
6,310 |
72" |
16' |
44" |
| BH-12 |
12 CYDS |
7,438 |
96" |
16' |
44" |
| BH-15 |
15 CYDS |
8,766 |
96" |
20' |
44" |
|
