CHERNE
- Aqua LocŪ
Hydrostatic Test Pumps
|
BACK CHERNE
MAIN PRODUCTS PAGE PLUG SAFETY |
CHERNE Hydrostatic Test Pumps |
| The Aqua-LocŪ
Hydrostatic Test Pumps are designed for pressure testing waterlines and
sewer force mains. Both the piston and diaphragm style pumps are
designed to be the most user friendly pumps in the industry. Clear
by-pass hoses allow you to see flow, which confirms that the pump is
working. All quick - disconnect connections are color coded for fast
set-up, even for the infrequent user. We embossed the operating
instructions on hard plastic and hardwired them to the unit. |
| CHERNE
- Aqua LocŪ Diaphragm
Style Hydrostatic Test Pump |
|
Diaphragm Style Hydrostatic Test Pump |
This
pump supplies up to 9.5 gpm at pressures up to 550psi. It has two Buna-N
diaphragms that handle chlorine solutions up to 10%. To prolong the life
of the pump, its control unit returns excess backpressure into the water
reservoir.
The diaphragm pump can be suction fed only. You can run this pump
completely dry. Available in Honda or Tecumseh engines. |
|
CHERNE - Aqua
LocŪ Piston Style
Hydrostatic Test Pump
|
|
Piston Style Hydrostatic Test Pump
|
The
piston style pump supplies up to 10gpm at 450 PSI. This pump allows you
to suction or pressure feed the pump. The pulsation hose eliminates the
need for a surge tank. The manifold design reduces the possibility of
leaks.
A thermal relief valve safeguards against overheating. Available with a
Briggs and Stratton IntekTM engine. |
Diaphragm Style Pump |
Piston Style Pump |
|
SPECIFICATIONS for
CHERNE Aqua LocŪ Hydrostatic
Test Pumps |
