|
| |
CTI Clamp On Forks
|
BACK |
 |
|
CTI Clamp On Forks |
Construction Technology, Inc. addressed the
need to develop a clamping mechanism that would help protect loader
buckets when used to attach forks and other products. The result was its
patented CTI clamping device, which features...
 | Swiveling top and hinged bottom pads
that make efficient contact with the surface of the bucket, improving
fit and function. |
| Large clamp spacing to stabilize the
forks and spread loads across a wide area. (This also helps in mounting
the forks on the reinforced portions of the loader bucket, minimizing
possible bucket damage.) |
| Oversize sliding clamp handle to make
mounting fast and easy. |
| Substantial uprights to keep pallets
from slipping backwards. |
|
|
 |
|
Clamp-On
Model |
Part Number
|
Lift Capacity
Per Set |
Tine Length
|
Tine Width
|
Clamp Opening
|
Weight Per
Set |
|
CL10
|
610-0700
|
1,000 lbs. at 18
inches |
36 inches
|
3 inches
|
1 1/2
inches |
182 lbs.
|
|
CL40
|
640-0700
|
4,000 lbs. at 21
inches |
42 inches
|
4 inches
|
2 inches
|
302 lbs.
|
|
CL60
|
660-0700
|
6,000 lbs. at 24
inches |
48 inches
|
4 inches
|
2 inches
|
390 lbs |
|
|
CTI
ADVICE ON CLAMP-ON FORKS
It is possible, however, to damage a bucket even with CTI Clamp-On forks.
For best results, be sure clamp pads are in working order and never
over-tighten the clamp handles! And remember that lift capacity is limited
by both the tine capacity of the forks and the capacity of the loader,
whichever is less! Also, because of the increased load radius with forks
and their additional weight, loader lift capacity is reduced by
approximately 17% when forks are added |
CONTACT us for the FORKS that will work on your
Your Specific Model
1-800-877-4571 ext 210 |
|
