"Your Construction Partner"
    Since 1970
 


ARKANSAS BRANCH 800-877-1426 
CORPORATE 800-877-4571ICM ONLINE STORE

  

 
HOME PAGE   SITE MAP CONTACT US   BRANCH  LOCATIONS

ABOUT ICM

ICM News Page
Used Equipment
Email ICM
Construction Info
 & Link Page
Employment

We Accept

Financing is available with low monthly payments!!!! Contact your sales rep for details.

 

 

FULL BODY HARNESS 

BACK                     SHOCK ABSORBING LANYARDS              ROPE GRABS         CONFINED SPACE EQUIP
Fall Protection Safety Equipment Protecta from ICM              POSITIONING LANYARDS                  REBAR ASSEMBLIES
AB104A13 Contractor's Full Body Harness w Back Support

FEATURES

bullet1-3/4" wide nylon straps (polyester or Kevlar™ available)
bulletSliding back D-ring-shock absorbing design
bulletIntegrated padded back support/tool & accessory belt with friction lock closure
bulletSub-pelvic strap offers greater support while arresting a fall
bulletStandard and Extra-Large sizes
bulletHigh visibility green with black sub-pelvic strap
bulletExclusive leg strap design for minimal binding when stooping or squatting for extended periods
bulletShoulder pads for added comfort
bullet4.54 lbs. total weight
bulletTwo side D-rings for positioning
bulletSewn-in load indicators provide immediate visual inspection point
bulletThree parachute buckle closure points for 100% closure
bulletTorso adjustments for personalized fit.
bulletIndividual Serial Number for issuance and traceability
bulletFull compliance with OSHA 1910/1926 and ANSI Z359.1-1992 Standards
bulletDesigned for both male and female use


AB104A13 FULL BODY HARNESS

AB102A Climbing/Rescue Model Full Body Harness

FEATURES

bullet1-3/4" wide nylon straps (polyester or Kevlar™ available)
bulletSliding back D-ring-shock absorbing design
bulletChest D-rings for climbing/retrieval
bulletSub-pelvic strap offers greater support while arresting a fall
bulletStandard and Extra-Large sizes
bulletRed with yellow sub-pelvic strap
bulletRemovable shoulder pads available for added comfort
bulletLightweight - 2.9 lbs.
bulletSewn-in load indicators provide immediate visual inspection point
bulletThree parachute buckle closure points for 100% closure
bulletTorso adjustments for personalized fit.
bulletSewn-in belt loops for tool/support belt
bulletIndividual Serial Number for issuance and traceability
bulletFull compliance with OSHA 1910/1926 and ANSI Z359.1-1992 Standards
bulletDesigned for both male and female use

 

Full Body Harness Rescue - PROTECTA from ICM

AB102A FULL BODY HARNESS

AB102A1 Climbing/Rescue/Positioning Model Full Body Harness
FEATURES
bullet1-3/4" wide nylon straps (polyester or Kevlar™ available)
bulletSliding back D-ring-shock absorbing design
bulletChest D-rings for climbing/retrieval
bulletSub-pelvic strap offers greater support while arresting a fall
bulletStandard and Extra-Large sizes
bulletRed with yellow sub-pelvic strap
bulletRemovable shoulder pads available for added comfort
bulletLightweight - 3.6 lbs.
bulletTwo side positioning D-rings
bulletSewn-in load indicators provide immediate visual inspection point
bulletThree parachute buckle closure points for 100% closure
bulletTorso adjustments for personalized fit.
bulletSewn-in belt loops for tool/support belt
bulletIndividual Serial Number for issuance and traceability
bulletFull compliance with OSHA 1910/1926 and ANSI Z359.1-1992 Standards
bulletDesigned for both male and female use
Full Body Harness Dbl D Ring - PROTECTA from ICM
AB102A1 FULL BODY HARNESS

AB17540 FIRST® 5 Point Positioning Full Body Harness
FEATURES
bullet1 dorsal D-ring, 2 side-hip positioning D-rings
bulletParachute buckle leg and chest closures, torso adjusters
bulletSupple back plaque
bulletUniversal sizing
bullet1.75" wide polyester - blue top, yellow bottom
bulletWebbing minimum tensile strength >5,000 lbs.
bulletZinc plated stamped steel hardware
bulletNet Weight 2.82 lbs.
bulletMeets or exceeds OSHA 1926 & ANSI Z359.1-1992 performance criteria

 
Full Body Harness - Dble D Ring - PROTECTA - From ICM
AB17540 FULL BODY HARNESS
 
November 15, 2011 Copyright © 2001 ICM Ebiz Division.  ebiz@icminc.us