|
| |
|
MINI POWERAM Model 1425
Hydraulic Rod Pusher/Puller
|
|
BACK |
POWERAM Model 1425 |
|
MINI POWERAM Model 1425
Hydraulic Rod Pusher/Puller
|
|
This
compact machine installs new underground utilities by pushing steel rods
under roadways, etc. and pulling the required pipe or cable back. It is
normally used for water, gas, electric, telephone, and cable TV services,
as well as sewer laterals, traffic signals, street lighting, and
irrigation installations.
The Poweram Model 1425 is small, but because of
its surprising performance in some of the toughest soils, you should
seriously consider it for any project where very tight space restrictions
apply.
One person can operate the model 1425. It has two hydraulic cylinders
controlled by one valve, which puts the operator in control of the machine
and his/her own safety. The cylinders actuate the patented jaw system that
grips the push rods. The centerline of the push rod is 4 inches above the
bottom of the machine. The Model 1425 can pull up to 4" pipe (or two 2"
pipes) in most soil conditions. Larger pipe can be installed in suitable
soils. The longest practical distance for accuracy depends on soil
conditions and operator experience. Using an electronic locating devise
helps the operator make critical decisions that can greatly increase
productivity. We recommend using the No. 363 Safety Shoring Box to protect
the operator and to provide a faster and more stable set-up.
Poweram push/pull rods have threaded joints; no couplings are required.
They can be added and removed within the length of the machine. The
strong, course threads require only 3 ½ turns to seat. The Poweram jaw
system grips the rods tightly without creating sharp, dangerous steel
slivers. The 14 inch stroke cylinders pull the 3 ft. long rods in three
"bites", and allow room to bring the pipe or cable into the machine to
finish the pull. |
|
Specifications - MINI
POWERAM Model 1425 Hydraulic Rod
Pusher/Puller |
|
 | 42,420 pounds of pushing capacity at 3,000 psi
|
| 35,030 pounds of pulling capacity at 3,000 psi |
| 18 " wide x 12" high x 48" long |
| Machine weight approximately 400 pounds |
| 14" stroke hydraulic cylinders (2) |
|
|
Accessories - MINI POWERAM
Model 1425 Hydraulic Rod Pusher/Puller
|
| Safety Shoring Box |
| Accessory Tote Box |
| Portable Hydraulic Power Unit |
| Alloy steel push rods - Solid and Hollow rods are available |
| Push heads |
| Expanders & Couplings for pulling up to 4" pipe |
| Electronic Locating equipment |
|
|
