|
| |
SOKKIA
SET Series 100
Total Stations-The Ultimate Tool for Surveying
|
|
BACK
Optical
Theodolites Digital
Theodolites Levels
Data Collectors |
Set 100 Total Stations |
|
Sokkia’s advanced mechanical, optical and electronic technologies
available in the Series 100 total stations makes them the ultimate tools
for surveying efficiency, ease and durability. Two large displays allow
at-a-glance confirmation of measurement data. Alphanumeric keys and
user-defined softkeys enable simple and efficient operation. |
|
Some
of the on-board programs include:
 |
Job
and feature code management Setting-out |
|
Resection |
|
Offset
measurement |
|
3-D
coordinate measurement |
|
Angle
and azimuth input |
|
Missing
line measurement |
|
Remote
elevation measurement |
|
|
The
Series 100 has a large internal memory capable of holding a full 3,000
data points. Multiple job files allow a maximum of twenty four different
files for different jobs. Point numbers can be input alphanumerically.
Forty feature codes (max. 16 characters each) can be stored in the
memory for easy recall for recording. Measurement and recording are
performed simultaneously with a single touch of the “AUTO” key.
Known point coordinates can be input directly from the keyboard or
uploaded with ProLINK Software. Stored data is output in SDR33 format.
Our
latest telescope design provides fast and accurate measurements required
by your applications. Read directly to a standard glass prism or use
reflective sheet targets when using a prism is not convenient. |
|
Sokkia
has now boosted the performance of the new Series 100 instruments by:
|
Improving
the distance measurement speed |
|
Streamlining
the internal components thereby improving its serviceability |
|
Removing
the lower motion to prevent field blunders |
|
Reduced
weight—the Series 100 total stations weigh a mere 11.7 lbs.
(5.3kg), including Tribrach, handle and battery. |
|
Interfaces
easily with Sokkia’s SDR33 Electronic Field Book® with two-way
communication functions. |
|
|
Series
100 total stations are supplied with two batteries. When fully charged,
battery life is about 5.5 hours per battery, or approximately 660
measurements.
* Recharging takes only 70 minutes or less.
The Series 100 total stations come standard with a full 3 year warranty.
* In the Fine and Single measurement modes at measurement
intervals of 30 seconds. |
|
Applications:
|
Boundary
Surveying |
|
Topographic
and As-built surveys |
|
Control
surveys |
|
Construction
Staking and Layout |
|
Road
Staking and Construction Specialized Mapping applications: |
|
Law
Enforcement/Accident Investigation |
|
Mining |
|
|
|
| |
SET2110
|
SET3110
|
SET4110
|
| Angle
Measurement |
Accuracy
(DIN 18723) |
2"
(0.6mgon) |
3"
(1mgon) |
5"
(1.5mgon) |
| Display Resolution (selectable) |
0.5"/0.1mgon/0.002mil
1"/0.2mgon/0.005mil |
1"/0.2mgon/0.005mil
5"/1mgon/0.02mil |
1"/0.2mgon/0.005mil
5"/1mgon/0.02mil |
| Distance
Measurement (Slope
distance, good conditions: no haze, visibility 25 miles (40km), overcast,
no heat shimmer) |
| Reflective Sheet
Target RS90N |
390
ft. (120m) |
320
ft. (100m) |
260
ft. (80m) |
| Single AP01 Prism |
8,800
ft. (2,700m) |
8,200
ft. (2,500m) |
5,900
ft. (1,800m) |
| Triple
AP01 Prism |
Triple
AP01 Prism |
10,800
ft. (3,300m) |
7,800
ft. (2,400m) |
| Nine AP01 Prisms |
13,700
ft. (4,200m) |
13,000
ft. (4,000m) |
9,500
ft. (2,900m) |
| Distance
Measuring Time (initial) |
| Fine Mode |
2.0s (3.7s) |
2.0s (3.7s) |
2.0s (3.7s) |
| Rapid Mode |
0.9s (2.1s) |
0.9s (2.1s) |
0.9s (2.1s) |
| Tracking Mode |
0.4s (1.9 s) |
0.4s (1.9 s) |
0.4s (1.9 s) |
| Telescope |
| Magnification |
30x |
30x |
30x |
| Objective aperture |
45mm
(1.8 in.)(EDM:50mm (2.0in.)) |
45mm
(1.8 in.)(EDM:50mm (2.0in.)) |
45mm
(1.8 in.)(EDM:50mm (2.0in.)) |
| Resolving Power |
3" |
3" |
3" |
| Minimum Focus |
3.3 ft. (1.0m) |
3.3 ft. (1.0m) |
3.3 ft. (1.0m) |
|
