Target
HIGH SPEED Diamond Blades for Cut Off Saws - Pipe Saws
|
|
BACK |
EH5-General
Purpose / EH8-Abrasive
Quality Grade Diamond Blade
EH5 (Black
Screen) for small to medium jobs - general purpose cutting of concrete,
masonry, and stone.
EH8 (Red
Screen) for small to medium jobs - use on a wide range of abrasive materials
such as soft brick, abrasive block and green concrete or
cured concrete with soft aggregate.
|
EH Series Diamond Blades |
Diamax
DCX-General
Purpose
Quality Grade Diamond Blade
DCX: for small to medium jobs - general purpose cutting cured concrete, masonry and soft abrasive
stone
|
DCX Series Diamond Blades |
DH5-General
Purpose / DH8-Abrasive
Premium Grade Diamond Blade
DH5 for small to medium jobs - cuts most
soft to medium-hard cured concrete, masonry and stone
materials. Lower cost per cut and longer blade life.
DH8 for small to medium jobs - is
for maximum life on soft brick, abrasive block and
concrete pavers. Lower cost per cut and longer blade life.
|
DH Series Diamond Blades |
GH5-General
Purpose / GH8-Abrasive
Premium Grade Diamond Blade
GH5 for Medium to Large Job - general purpose
for cutting of most cured concrete, masonry or stone materials
GH8 for Medium to Large Job - for maximum
life, general purpose cutting of block, abrasive block,
soft brick and concrete pavers. |
GH Series Diamond Blades |
HS3-Hard
Material / HS5-General Purpose / HS8-Abrasive
Super Premium Diamond Blade
HS3 for Medium to Large Jobs - for fast
cutting of hard materials, cured concrete, masonry
materials and critically hard brick pavers.
HS5 for Medium to Large Jobs - for
extended life when cutting cured concrete, masonry,
stone, concrete pilings with steel, culvert pipe with
steel, and brick pavers.
HS8 for Medium to Large Jobs - or maximum
life, general purpose cutting of block, abrasive block,
soft brick, concrete pavers and green concrete.
|
HS Series Diamond Blades |
THS3-General
Purpose / THS5-Hard Material / THS8-Abrasive
Super Premium Blade
THS3 for Medium to Large Jobs - for fast,
smooth cutting on a variety of concrete stone and masonry
materials.
THS5 for Medium to Large Jobs - for fast, smooth
cutting of medium to hard cured concrete, brick , pavers, masonry and
stone.
THS8 for Medium to Large Jobs - for longer
life and smooth cuts on most concrete block, bricks and
pavers. |
THS Series Diamond Blades |
Barracuda
Super Premium Diamond Blade
Barracuda for Medium to Large jobs provides fast smooth cuts on almost
any masonry, tile, stone, or hard concrete material not recommended for
abrasive materials like block or asphalt.
This product can also be used on Walk Behind Concrete Saws and Masonry
Brick Block Saws |
Barracuda Diamond Blades |
FC-10
Hard Materials
Super Premium Diamond Blade
FC-10 for Medium to Large Job provides fast cutting of
hard concrete, pavers brick, and concrete pipe.
This product can also be used on Walk Behind Concrete Saws and Masonry
Brick Block Saws |
FC-10 Diamond Blades |
DA5
Dri Disc Blade - ASPHALT
Premium Diamond Blade
DA5 for small to medium jobs - fast cutting of
asphalt, asphalt over concrete and some green concrete. |
DA5 Diamond Blade
|
AP5
Dri Disc Blade - ASPHALT
Super Premium Diamond Blade
AP5 for small to medium jobs - for extra long
life cutting of asphalt, asphalt over concrete and some green concrete |
AP5 Diamond Blade
|
