MODEL 2511 -
2811 & SWIVEL Core Drill Rigs from Target
|
|
BACK |
|
2511 Core Drill Rig
|
|
MODEL 2511
CORE DRILL RIG |
Features of the Combination Base
 | Standard 14" x 19" cast aluminum base is rugged, yet lightweight and
portable. |
| Base is reinforced for added rigidity. |
| Four base leveling screws for precise drill alignment, even on rough
surfaces. |
| Two durable 5" diameter wheels mounted on the back of the base for
easy mobility. |
| Center mounting slot accommodates anchor bolts, or an optional
vacuum assembly holds the machine securely on the work surface. |
| Minimum distance to centerline of hole from wall is 2". |
| Optional compact base is available. |
Features of the Column
| Rigid steel column, 42" long x 2-1/2" square, bolts securely into
the base. |
| Built-in jackscrew provides stability for ceiling or wall bracing.
|
| Gear rack is welded solidly to the back of the column. |
Features of the Drilling Head
| Precision rack and pinion gear system. |
| Single-lever "slip-through" feed handle. |
| Locking bolt on the carriage locks the head assembly in any
position. |
| Sealed motor switch with ammeter. Extra 115V receptacle for vacuum
assembly operates independent of motor switch. |
| Adjustable and replaceable bronze bearing plates for precise head
alignment and smooth in-feed travel. |
| Easy on/off motor mounts. Quick disconnect lever releases head
assembly for fast removal. |
| Standard maximum bit capacity of 10"; optional spacer kits available
for larger bit capacity |
|
|
SPECIFICATIONS FOR MODEL 2511 CORE DRILL
RIG |
| 2511-15-1 |
15 AMP |
Milwaukee |
10 |
Not Recommended |
105.00 |
| 2511-20-4 |
20AMP |
Milwaukee/Clutch |
10 |
14 |
105.00 |
| 2511-20-5 |
20AMP |
Milwaukee/Clutch |
10 |
14 |
105.00 |
| 2511-20-6 |
20AMP |
Milwaukee/Clutch |
10 |
14 |
105.00 |
|
|
2811 Core Drill Rig
|
|
MODEL 2811 CORE DRILL RIG |
Features of the Combination Base
| Standard 14" x 19" cast aluminum base is rugged, yet lightweight and
portable. |
| Base is reinforced for added rigidity. |
| Four base leveling screws for precise drill alignment, even on rough
surfaces. |
| Two durable 5" diameter wheels mounted on the back of the base for
easy mobility. |
| Center mounting slot accommodates anchor bolts, or an optional
vacuum assembly holds the machine securely on the work surface. |
| Minimum distance to centerline of hole from wall is 2". |
| Optional compact base is available. |
Features of the Column
| Extra-rigid precision-machined steel column for more accurate
drilling. |
| 42" long x 2-7/8" square column bolts securely to the reinforced
base. |
| Built-in jackscrew provides stability for ceiling or wall bracing.
|
| Gear track is bolted solidly to the back of column and is easily
replaced. |
| |
Features of the Drilling Head
| Precision rack and pinion gear system. |
| Single-lever "slip-through" feed handle. |
| Locking bolt on the carriage locks the head assembly in any
position. |
| Sealed motor switch with ammeter. Extra 115V receptacle for vacuum
assembly operates independent of motor switch. |
| Adjustable and replaceable bronze bearing plates for precise head
alignment and smooth in-feed travel. |
| Easy on/off motor mounts. Quick disconnect lever releases head
assembly for fast removal. |
| Standard maximum bit capacity of 10"; optional spacer kits available
for larger bit capacity |
| Carriage is two-piece, precision machined for more precise fit on
column. |
|
|
SPECIFICATIONS FOR MODEL 2811 CORE DRILL
RIG |
|
2811-15-1 |
15 AMP |
Milwaukee |
10 |
Not Recommended |
110.00 |
| 2811-20 |
20AMP |
DeWalt/Clutch |
10 |
14 |
110.00 |
|
2811-20-5 |
20AMP |
Milwaukee/Clutch |
10 |
14 |
110.00 |
|
2811-20-4 |
20AMP |
Milwaukee/Clutch |
10 |
14 |
110.00 |
|
2811-20-6 |
20AMP |
Milwaukee/Clutch |
10 |
14 |
110.00 |
|
|
|
|
SWIVEL CORE DRILL RIG |
Heavy duty multipurpose design drilling
up to 12" holes at any angle.
Features of the Base
| Standard 18" x 21" ribbed constructed cast aluminum base is
reinforced for added rigidity. |
| Four base leveling screws for precise drill alignment, even on rough
surfaces. |
| Two durable 5" diameter wheels mounted on the back of the base for
easy mobility. |
| Center mounting slot accommodates anchor bolts or an optional vacuum
assembly to hold the machine securely on the work surface. |
Features of the Column
| Double column back brace for increased strength and rigidity for
precision drilling. |
| Rigid steel, telescoping column extends from 5' to 10' and bolts
securely into base. |
| Built-in live center jackscrew with 4-1/2" adjustment. |
| Gear rack is bolted solidly inside channel track and provides 26" of
travel. |
Features of the Drilling Head
| Precision rack and pinion gear system. |
| Pivots 360° and locks quickly into position. |
| Pivots 250° about the column and locks into position. |
| Locking bolt on the carriage locks the head assembly in any
position. |
| Replaceable bronze wear pads and bearings for precise head alignment
and smooth in-feed travel. |
| Standard maximum bit capacity of 12"; optional spacer kits available
for larger bit capacity up to 18". |
| Switch box with ammeter. |
| Extra 115V receptacle operates independent of motor switch. |
|
|
SPECIFICATIONS FOR MODEL SWIVEL CORE
DRILL RIG |
|
Swivel-15-1 |
15 AMP |
Milwaukee |
12 |
Not Recommended |
168.00 |
|
Swivel-20 |
20AMP |
DeWalt/Clutch |
12 |
16 |
168.00 |
|
Swivel-20-4 |
20AMP |
Milwaukee/Clutch |
12 |
16 |
168.00 |
|
Swivel-20-5 |
20AMP |
Milwaukee/Clutch |
12 |
16 |
168.00 |
|
