Select Page
ST6125G Multiquip Submersible Pump

This submersible centrifugal pump is a heavy-duty performance minded product for moving water in multiple confined and open area applications. This is a very powerful, versatile, low maintenance pump that is perfect for a wide range of operations supporting Contractors, Service Utilities, and Municipalities. Further, the ST6125G incorporates a rugged industrial cast iron housing, dual shaft seals, sealed ball bearings impeller, and molded 50’ Power Cable with strain relief. This type of pump requires a Control Box to provide safe operations and safety shutdowns such as thermal & voltage overload protection. Further, the Control Box would permit float switch (if required) connections.

  • 15.0HP, 230/460V, three-phase 60 Hz
  • Running AMPS – 35A (230V) / 18A (460V)
  • Field changeable voltage (motor J-box)
  • 6” Industrial Flange Male Discharge Port
  • Reliable double mechanical oil-filled seals
  • Easy Impeller Clean-out
  • Suction Cover – Ductile Iron (450)
  • Suction Strainer – Stainless Steel (304)
  • Cast iron/steel motor casing serves as heat conductor
  • Pumps Liquid Up To 104° F – pH 4-10
  • 50’ of molded power cord w/strain relief
  • Dewaters Flat Surfaces Up To 1/2” Levels
  • MAX installation depth – 82’ (25m)

mqst6125g

ST6125G Multiquip Submersible Pump

PDF Icon
YELLSUB Multiquip Submersible Pump

The Yellow Submarine is MQ’s most lightweight, compact submersible pump. It is a great choice for common household moving water applications such as: flooded rooms, flat roofs, fill tanks, basins, fountains and waterfalls. One piece polymer pump casing body resists corrosion and heat. The YELLSUB incorporates internal thermal overload protection, dual shaft seals, and positive direct drive thermoplastic impeller secured with stainless steel fittings.

  • .25HP, 115V/2.5A, 1Ø, UL & CUL Listed Electric Motor
  • Built-in Overload Protection
  • 1 1/4” (NPT) Male Discharge w/1 ¼” Female Adapter and Thermoplastic Garden Hose Adapter
  • Total Head: 15 ft
  • MAX Capacity: 33 gmp
  • Pumps Liquid Up To 120° F
  • Dewaters Surfaces Up To 1/8” Levels
  • Rated for 4,500 Hours of Intermittent Duty

mqyellsub

YELLSUB Multiquip Submersible Pump

PDF Icon
PX400 Multiquip Submersible Trash Pump

This lightweight, compact submersible trash pump is ideal for moving water with debris (Maximum size – 1” solids). Additionally, with its abrasion resistant resin impeller, and corrosion resistant stainless steel construction, this pump tackles marine and certain chemical applications. Further, the PX400 incorporates internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 19’ Power Cable with strain relief.

  • .5HP, 115V/6.2A, 1Ø, Electric Motor
  • Built-in Overload Protection
  • 2” (NPT) Female Discharge w/Barb Hose Adapter and hose clamp
  • Total Head: 34 ft
  • MAX Capacity: 72 gmp
  • Pumps Liquid Up To 120° F
  • 304 Stainless Steel Pump Housing Body
  • Dewaters Flat Surfaces Up To 1” Levels

mqpx400

PX400 Multiquip Submersible Trash Pump

PDF Icon
ST2040T Multiquip Submersible Trash Pump

This lightweight, compact submersible trash pump is ideal for moving water with debris (Maximum size – 1” solids). The Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller with Neoprene Rubber overlay tackles tough dewatering applications and heavy usage operations. Further, the ST2040T incorporates a carrying handle, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller, easy impeller clean-out, and molded 25’ Power Cable with strain relief.

  • 1.0HP, 115V/6.5A, 1Ø, UL & CUL Listed Electric Motor
  • Built-in Overload Protection
  • 2” (NPT) Female Discharge
  • Total Head: 40 ft
  • MAX Capacity: 79 gmp
  • Pumps Liquid Up To 120° F
  • Heavy-duty Cast Iron Housing construction
  • Dewaters Flat Surfaces Up To 2” Levels

mqst2040t

ST2040T Multiquip Submersible Trash Pump

PDF Icon
ST2010TCUL Multiquip Submersible Trash Pump

This compact submersible trash pump is ideal for moving water with debris (Maximum size – 1” solids). The Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller tackles tough dewatering applications and heavy usage operations. Further, the ST2010TCUL incorporates a carrying handle, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller, easy impeller clean-out, and molded 50’ Power Cable with strain relief.

  • 1.0HP, 115V/6.8A, 1Ø, UL & CUL Listed Electric Motor
  • Built-in Overload Protection
  • 2” (NPT) Female Discharge
  • Total Head: 45 ft
  • MAX Capacity: 95 gmp
  • Pumps Liquid Up To 120° F
  • Heavy-duty Cast Iron Housing construction
  • Dewaters Flat Surfaces Up To 2” Levels

mqst2010tcul

ST2010TCUL Multiquip Submersible Trash Pump

PDF Icon