The GB2000 diffuser enables Multiquip light tower users to meet requirements for glare-free lighting. Easily attaching to the mast T-bar in place of two conventional lamps, it will dramatically reduce glare in the work area, eliminate shadows and improve safety. Two 1,000 watt metal-halide lamps are enclosed by a durable polyester balloon inflated by a quiet industrial fan. The GB2000 is deal for highway work, job sites and special events.

• 360° glare-free illumination featuring two 1,000 watt metal-halide lamps
• Rapid bulb restrike time of only 6 to 10 minutes
• Balloon inflates automatically and quickly – less than thirty seconds – after activating light
• Ties directly into the light tower electrical system
• Excellent visibility with coverage of up to 300 feet
• Transport and storage is facilitated by its self-contained design
• Limitless applications including industrial, mining, traffic control and special events
• Operator has option of leaving two of the original lights in place for spot lighting
• Adaptable to the MLT-series or the LT-12D series Multiquip light tower

When space is limited but illumination is required, call on the Multiquip GloBug Solo GBW Series!

• Metal Halide lamp – single 1,000 watt lamp for maximum illumination. Pure white light – 3400° K
• Light coverage up to 150 feet
• 360° glare free illumination with standard balloon
• Quick restrike time – 3 to 5 minutes
• Universally adaptable to all AC power supplies – accepts 50/60Hz, 100-240V
• Downward direct illumination with reflector balloon
• Self-inflating balloons are easy to install and inflate in less than 20 seconds
• Optional message strip available
• Three-stage mast – extends up to 13′ 2″
• Five outriggers for great stabilization

The ideal combination of the innovative GloBug with a heavy duty cart for easy transportation! The Steerable cart sets up without tools and provides the perfect place to connect to an optional Portable Generator.

• Steerable cart design for easy transportation – sets up without tools; easy to maneuver.
• Quick restrike time – 3 to 5 minutes.
• Universally adaptable to all AC power supplies – accepts 50/60Hz, 100-240V.
• Three-stage mast – extends up to 12′ 1″.
• Three outriggers for great stabilization.
• System can be broken down and placed in the trunk of a car.
• Light coverage up to 150 feet.

The GloBug GBS is ideal for mobile construction. The flexible clamps allow installation at any angle, is safer for construction crews, and complies with many State DOT requirements for jobsite illumination.

• GBS Series – Includes GBP 1,000 watt lamp, poles and mounting brackets
• Safe for vehicle traffic – Drivers not blinded by intense glare of conventional light towers
• Improved visibility and elimination of blind spots on the job site

Equipped with lightweight, internal electronic ballast the GBP allows the user to develop their own mounting system or use as a replacement balloon for the GBC, GBS or GBW models. It’s 1,000 watt output effectively lights up any area.

• Reflector Top
• Reduced component weight
• Low starting current requirement
• Cusomize with 12 x 43 in optional message strips

When illumination is needed for very confined spaces call on the Multiquip GloBug Solo Jr. GB-12BW.

• Light weight electronic ballast built inside the lamp housing
• Air-assist mast lowering system protects light bulb
• Quick and easy setup; balloon inflates in less than 30 seconds
• 360º glare-free lighting
• Carrying cases included for easy transportation

This accessory allows you to quickly install a mounting pate to any flat vertical surface to attach your GloBug Lamp.

• Includes Plate Mount and extension poles (order balloon assembly separately)
• Quickly attaches to any flat vertical surface
• Compatible with all GloBug models
• Ideal for mobile equipment

Wacker Nueson

Wacker Neuson’s light balloon features a compact design providing light where you need it with maximum flexibility. Ideally suited for general job site illumination, road work, indoor/outdoor illumination of concrete pours and party rentals. The rugged, simple construction allows for use almost anywhere a reliable light source is needed. A powerful and portable package to light your job site.

• The actual balloon is constructed from a special foldable and durable material. The balloon does not need to be blown up. It is held open by metal supports
• The diffused light from the balloon reduces shadows and contrast for bright, clear illumination
• The tripod can be raised to more than 13.5 ft./5 m for maximum light coverage
• For added stability, the tripod is secured to the ground with a standard anchoring system
• The LB 1 folds into a compact package for easy storage and transport

The LBA 1 is a fully functional light balloon without tripod (balloon, ballast and cord), designed for use with the customer’s own equipment. The Wacker Neuson tripod is available as optional accessory – or you could buy the LB 1 that includes balloon and tripod.

• The powerful 1000 W metal halide lamp offers maximum brightness without glare. That makes it particularly suitable for road building sites
• The diffused light from the balloon reduces shadows and contrast for bright, clear illumination
• The actual balloon is constructed from a special foldable and durable material. The balloon does not need to be blown up. It is held open by metal supports
• Quickly and easily attached to a scaffold or an asphalt paver, for instance