Anchorage Connections,Fall Protection,Anchors

Our tie-off adaptor is our most versatile anchorage connector combining ease of use, light weight and high strength (5,000 lb. Min. tensile strength). It provides you with an anchorage connector that can be used almost anywhere an anchorage point is needed. Know matter what you are connecting to, DBI/SALA has a connector to get the job done and keep you safe in case of a fall.

• Pass-through design makes attaching to anchorage quick and easy
• 1-3/4″ polyester strength member (5,000 lb. Min. tensile strength)
• 3″ wide polyester wear pad for added abrasion resistance and product longevity
• 3 ft. in length, other lengths available
• Coated steel hardware for corrosion resistance and strength
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359

For complete horizontal mobility, the Glyder 2™ is designed for use with the DBI-SALA Force2™ shock absorbing lanyard when used at your feet. Enjoy total fall protection, along with freedom of movement, as the anchor effortlessly slides across the beam following you as you work. Easily installed and just as easily removed and taken to a new site, DBI-SALA beam anchors provide economical flexibility. You can also depend on both our fixed and sliding beam anchors to stay securely attached to a horizontal beam. If there is a fall, we make sure you’re secure!

• Provides complete horizontal mobility, tie-off overhead or at your feet (use with Force2™ shock absorbing lanyard when used at your feet)
• Anchor effortlessly slides across the beam on its wear pads, eliminating metal-to-metal contact
• Integrated ratcheting adjustment system provides quick and easy installation and removal.
• Unique guarded locking mechanism protects the anchor from accidental disengagement.
• Dual beam grip adjustment prevents twisting and turning as it moves along the beam
• Extremely lightweight at only 3.7 lbs (1.66 kg), with a user capacity of 420 lbs. (189 kg) and a minimum breaking strength of 5,000 lbs (22kn)

The Protecta Concrete D-Ring Anchor Bolt provides a simple, versatile and safe concrete anchor for temporary or permanent applications. It incorporates an extremely rugged design and is 5,000 lb. rated for extended life and jobsite flexibility.

Complete Versatility and Flexibility

For added versatility, this anchor can be used for both temporary and permanent applications. It incorporates a re-usable D-ring assembly, just install a new bolt assembly and it’s ready to go again. The anchor was designed with strength and flexibility in mind. It is 5,000 lb. (22kN) rated, and an ideal connection point for Protecta shock absorbing lanyards, self retracting lifelines or even horizontal lifeline systems.

When you are out on the roof of a residential or commercial wood frame structure, whether flat or sloped, your fall protection system needs specialized components to keep you safe and secure without causing damage. DBI/SALA’s easy to use, economical roof anchor kits and anchorage components provide the perfect solution and meet the latest OSHA and ANSI standards. Know matter what you are connecting to, DBI/SALA has a connector to get the job done and keep you safe in case of a fall.

•  Complete roof anchor kit with Delta No-Tangle™ harness (model 1103513), rope adjuster with shock absorbing lanyard (model 1224005), 50 ft. lifeline assembly (model 1203000), counterweight (model 5901583), removable roof anchor (model 2103673) and carrying bag

• Removable/Reusable 1/4″ thick steel roof anchor
• Complete with zinc plated forged alloy steel O-ring
• Nail (twelve 16d {penny}) or bolt (six 1/4″x2-1/2″ or longer lag screws) into the sheathing and joist, rafter, etc. (roof member)
• Designed to be removable, it may be used again after an inspection
• Length when flat = 25 inches – Weight = 4.4 lbs.

The unique Saflok™ Steel Structure Fall Arrest System provides workers with 100% fall protection when connecting to beams, angle iron, bar joists, lattice steel and other structures in traditional power plants, substations, switch yards, manufacturing facilities or construction sites.

Field testing has successfully proven the ease of use, time savings, user acceptance and fall protection capabilities of the Saflok™ Steel Structure Fall Arrest System.

Elk River

• I-Beam Slider with Easy Adjustor Buttons on one end, Fixed other end, Fits 3-1/2” x 12” I-Beam
• I-Beam Slider with Adjustor Buttons on each end, Fits 3-1/2” x 14” I-Beams
• Stationary Beam Clamp 3-1/2” x 13-5/8”
• 18-1/4” x 3-7/8” x 2-3/8” I-Beam Slider with one end adjustment button to use on top or bottom flange Fits beams: 3-1/2” to 14”Maximum capacity — 400 lbs

Protecta

Anchorage connectors are dependent on specifi c job requirements — the type of attachment, environment and connecting system. That’s why we offer the most complete line, all rigorously tested to meet OSHA and ANSI standards and ensure strength. Our anchorages are a secure point of

attachment capable of supporting a load of 5,000 lbs. (22kN) per worker. An anchorage connector attaches your personal fall arrest system to the main anchorage or support structure.

Get a Quote Today  sales@icminc.us