Leica iCON excavate 31,Leica Excavator Control

The most flexible 2D excavator control system

Leica iCON excavate 31 is an easy-to-use, multifunctional 2D control system designed to make excavating easier and more productive. The system allows multiple elevation and slopes to be constructed, at any orientation without resetting the machine or laser height reference. Just enter the required depth and slopes and start off digging. iCON excavate 31 displays the bucket’s actual position relative to design elevation and slope, allowing you to reach the design grade faster. It features the unique PowerSnap concept that enables instant system installation and full interchangeability of control boxes. Flexibility that will inspire you!

• 3.5 ” Colour graphic display
• Simple user interface with intuitive graphics
• Function keys for instant access of important functions
• Selectable bucket reference point
• Cable-free control box. Easy snap-on/snap off mechanism
• Altitude warning – audible warning on selected height, useful for overhead cables and working under bridges and inside buildings.
• Interface to EZiDIG Buried Service Detector
• PowerDriller drilling function

Benefits

• High-accuracy automatic dual slope and level control
• Realtime cut/fill indication on the graphic display
• No grade checking needed
• Maximise your machine utilization and return-on investment by getting right to grade the first time
• No more over excavations – dig to planned grade easily and accurately. Save material and fuel cost
• Use iCON excavate 31 on multiple machines in your fleet. PowerSnap allows you to interchange control panels easily and rapidly as needed
• Fully scaleable system
• Audio and on-screen warning of buried services with connected EZiDIG sensor (available option)
• Easy vertical positioning of sheet piles with the unique PowerDriller function
  

  Leica iCON excavate 41 Advanced 3D Excavator Control System Leica iCON excavate 41 is the lastest excavator guidance system from Leica Geosystems offering you 2D and 3D machine control in one control box. You can work with dual grade functions in 2D as well as reference models and GPS in 3D. Switch view with the touch of just one button. Advanced 3D software allows you to create simple terrain models directly in the control box – a new feature providing great flexibility in the field. With the unique PowerSnap concept, Leica iCON excavate 41 simplifies system installation and enables rapid interchange of control panels between machines in your fleet.iCON excavate 41 supports Leica iCON telematics which enables you easy data transfer from office to machines, remote support and basic fleet management via the iCONnect website.

  Advanced 3D guidance Leica iCON excavate 41 uses 3D design (CAD) models and state of the art GNSS technology to guide the operator. Design information and real-time cut/fill indications are displayed in the cab on your control box, allowing you rapid excavation to the reference design. The system eliminates the need for grade checking, increasing both safety and productivity. No need for surveyors to enter the earthworks area. System features Work directly from CAD models with Leica iCON excavate 41 Switch between 2D and 3D view with the touch of just one button User-friendly operation with touch screen and buttons The single-panel solution saves space and increases view from the cab Full guidance with rich 3D graphics – see the job how you need to, see section, profile and 2D/3D view Create simple terrain models directly on the screen Compatible with most makes and models of excavators on the market – even dual boom excavators supported Simple & intuitive user interface – allows users to become confident and highly productive quicker Benefits Improve site safety – iCON excavate 41 removes the need for grade checkers to enter the earthworks area Eliminate over excavation and costly material overruns Work without boundaries – increases machine productivity by reducing your dependency on site survey teams Creates a greener site – reduced rework and increased productivity all add up to substantial fuel savings, as well as reduced machine hours, as the job gets done quicker! Construct complex geometries, profiles and grades in a fraction of the normal time. Handle “blind” and underwater excavation with ease Operator-friendly, easy-to-understand user interface reduces training time and costs Upgrade easily from 2D to 3D in the same control box Full payback on your investment can be achieved in one project Full support of iCON telematics services Leica PowerDigger Lite,Leica Machine Control Simple single slope control system for excavators  Easy machine control The Leica PowerDigger Lite control system offers the basic grade control functions operators expect for their routine excavating work. Choose your reference and enter the desired cut and/or slope depth. Final grade and the offset from the bucket edge are displayed on your graphic screen. With PowerDigger Lite you have the flexibility to work from different references such as existing surface, hub, stringline or a laser reference.The PowerDigger Lite system saves you time and money as you get your job done faster and it eliminates over excavation and downtime to make grade level checks. Difficult tasks as blind cuts or digging under water are far easier with the system as you see the bucket position on your control box display at any time. System features Accurate single slope and depth control 3.5″ Colour graphic display Simple menu structure – very easy to use Remote display supported 100 % waterproof (IP68) – no special sensors or cables needed for underwater use You can offset your reference surface Benefits Increase machine productivity Graphical cut/fill indication in the cab Be your own surveyor and save money No more over excavations Get done in fewer passes Increase safety on site. Audio and on-screen warning of buried services with connected EZiDIG sensor (available option)