Select Page
Cementitious Resurfacers,Manhole Resurfacers,Quadex,Sauereisen,5 Star
Quadex QM-1s Cementitious Resurfacer
Quadex QM-1s Restore is a factory blended, one component , high strength cement based, polypropylene fiber reinforced, shrinkage compensated mortar enhanced with a mono crystalline quartz aggregate (Granusil®). It is specifically designed for placement by low pressure spraying of mortar for the repair of concrete and masonry structures. This unique formulation allows for a monolithic one-pass application up to three inches in thickness by low pressure spraying.

  • Quality controlled one-component blend for uniform results
  • High early and ultimate compressive, flexural and bond strengths
  • Resistant to sulfate attack
  • Extremely low permeability
  • Sprayable
  • Enhanced with finely graded NSG aggregate

QM-1s

Quadex QM-1s Cementitious Resurfacer

 PDF Icon

Sauereisen Cementitious Resurfacers

Sauereisen F-121 Substrate Resurfacer
No. F-121 by Sauereisen is a high strength substrate repair material and water resistant barrier for prevention of inflow and infiltration in concrete or brick manholes. A Portland cement-based and primarily specified for municipal wastewater environments where structural integrity needs to be restored.

  • Pumpable and sprayable
  • Economical
  • Moisture tolerant
  • Applied by spincast/spray
  • Safe to use, non-toxic
  • Trowelable

Sauereisen Logo

Sauereisen F-121 Substrate Resurfacer

PDF Icon
Sauereisen F-121FBR Substrate Resurfacer
No. F-121FBR by Sauereisen is a Fiber-Reinforced substrate repair material. It also serves as a waterproofing barrier for prevention of inflow and infiltration in concrete or brick manholes.  It is a Portland cement-based and primarily specified for municipal wastewater environments where structural integrity needs to be restored. The existence of fibers within the formulation enables greater compressive strength compared to standard resurfacing materials.

  • Pumpable and sprayable
  • Economical
  • Moisture tolerant
  • Applied by spincast/spray
  • Safe to use, non-toxic
  • Trowelable

Sauereisen Logo

Sauereisen F-121FBR Substrate Resurfacer

 PDF Icon
Sauereisen F-170 SewerSeal
No. F-170 is a cementitious water infiltration barrier for use in wastewater collection systems. The product combines 100% calcium aluminate cement with finely graded inert aggregate, thereby offering notable corrosion resistance to mild acids and alkalies. It commonly seals and resurfaces deteriorated masonry and concrete structures. Typical applications include manholes, wet wells, lift stations, and pump stations common to municipal wastewater. This product exhibits high strength to withstand loads imposed upon underground infrastructure.

  • Pumpable and Sprayable
  • Apply by spincast, spray or trowel
  • Moisture tolerant
  • Corrosion resistant
  • Low permeability
  • Fiber reinforced for added durability

Sauereisen Logo

Sauereisen F-170 SewerSeal

 PDF Icon
 

 

 Five Star Centri – Cast Pipe Repair Mortars

Designed for easy application, these fiber reinforced hydraulic repair materials provide trenchless sealing, structural reinforcement and corrosion protection of existing underground metal and concrete pipes quickly and ecconomically – without removing them.