Hydrostatic Test Pump EL-8/12 is a medium volume medium pressure hydrostatic test pump designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.

• 8 GPM up to 1200 PSI
• 7.5 HP Electric Motor,  TEFC,  3 Phase,  60 HZ
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Heavy duty rugged roll cage construction, protects pump from damage

Hydrostatic Test Pump EL2 is a low volume high pressure hydrostatic test pump designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.

• 1.5 GPM up to 1000 PSI
• 1 HP Electric Motor,  TEFC,  110/220 Volt,  50/60 HZ
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Rugged roll cage construction, protects pump from damage

Hydrostatic Test Pump EL1 is a low volume low pressure hydrostatic test pump. Designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.

• 3 GPM up to 300 PSI
• 1/2 HP Electric Motor,  TEFC,  110/220 Volt,  60 HZ
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Rugged roll cage construction, protects pump from damage

Hydrostatic Test Pump EL1A is a low volume medium pressure hydrostatic test pump designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.

• 3 GPM up to 500 PSI
• 1 HP Electric Motor,  TEFC,  110/220 Volt,  50/60 HZ
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Rugged roll cage construction, protects pump from damage

Hydrostatic Test Pump EL3 is a low volume high pressure hydrostatic test pump designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.

• 1.5 GPM up to 1500 PSI
• 1.5 HP Electric Motor,  TEFC,  110/220 Volt,  50/60 HZ
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate reading

• 4 GPM up to 1800 PSI
• 5 HP Electric Motor,  TEFC,  220 Volt,  60 HZ
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Heavy duty rugged roll cage construction, protects pump from damage

The EL-5/500 is a medium volume medium pressure hydrostatic test pump designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.

• 5 GPM up to 500 PSI
• 2 HP Electric Motor,  TEFC,  110/220 Volt,  60 HZ
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Rugged roll cage construction, protects pump from damage

RICE Gas Powered Hydrostatic Test Pumps

Hydrostatic Test Pump. The DP-3B is a large volume medium pressure hydrostatic test pump. Designed to allow handling of up to a 10% chlorine solution, recommended for testing water lines up to 24″ in diameter.

• 11 GPM up to 550 PSI
• 163 CC 5.5 HP, air-cooled, 4 cycle Briggs & Stratton Engine, with oil alert
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Rugged roll cage construction, protects pump from damage
• Pump weight: 104 pounds Dimensions: 25 X 21 X 17 Shipping: 125 pounds

Hydrostatic Test Pump. The DPH-8 is a large volume low pressure hydrostatic test pump. Designed to allow handling of up to a 10% chlorine solution, recommended for testing water lines up to 96″ in diameter.

• 32 GPM up to 300 PSI
• 270 CC 9 HP, air-cooled, 4 cycle Honda Engine, with oil alert
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Rugged roll cage construction, protects pump from damage
• Pump weight: 178 pounds Dimensions: 35 x 25 x 19 Shipping: 200 pounds

Hydrostatic Test Pump. The DPH-56/250 is an extremely large volume low pressure hydrostatic test pump. Designed to allow handling of up to a 10% chlorine solution, recommended for testing water lines up to 96″ in diameter and above.

• 56 GPM up to 250 PSI
• 389 CC 13 HP, air-cooled, 4 cycle Honda Engine, with oil alert
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Rugged roll cage construction, protects pump from damage
• Pump weight: 250 pounds Dimensions: 35 x 25 x 19 Shipping: 275 pounds

Hydrostatic Test Pump. The DEH-3C is a mid volume, medium pressure test pump. Designed for testing water lines up to 16″ in diameter.

• 6 GPM up to 450 PSI
• 163 CC 5.5 HP, air-cooled, 4 cycle Honda Engine with Oil Alert
• Automatic Pressure regulator with inlet bypass
• Stainless Steel liquid-filled gauge ensures accurate readings
• Rugged roll cage construction, protects pump from damage
• Pump weight: 106 pounds Dimensions: 25 X 21 X 17 Shipping: 120 pounds

Get a Quote Today  sales@icminc.us