Mechanical Pipe Plugs-Gripper Plugs-T-handle Plugs
-Sure Grip Plugs
|
Cherne Original Gripper Mechanical Pipe Plugs
|
|
|
Cherne’s Gripper plugs can be used in a variety of applications including DWV (drain, waste and vent) testing and stack testing. End-of-Pipe design won’t fall in, whereas the Inside-of-Pipe design allows you to locate the plug inside the pipe as far as you need. Time tested, the Gripper® remains one of the most popular mechanical plugs on the market. Ideal for sewer testing and long-term applications.
- Made with glass-reinforced ABS plastic
- End-of-pipe design seals only at the end of a pipe
- Inside-of-pipe design seals inside pipe as far as needed
- Easy to install extra large zinc wing nut – won’t rust
- Natural rubber o-ring
- Galvanized carriage bolt to prevent corrosion
|
 Cherne Original Gripper Mechanical Pipe Plugs |
 |
|
|
|
|
|
|
|
|
|
Hub Fit Gripper Mechanical Pipe Plugs
|
|
|
|
Hub-Fit Gripper® Plug Features.
- Ideal for use in hub fittings and in bell-end pipe
- Pressure rated for conducting DWV tests
- Made with glass-reinforced ABS plastic
- Yellow color for greater visibility in pipe
- Natural rubber o-ring for positive seal
- Galvanized carriage bolt to prevent corrosion
- Easy-to-install, extra large zinc wing nut – won’t rust
|
 Cherne Hub Fit Gripper Mechanical Pipe Plugs |
|
|
|
|
|
|
|
|
|
|
Clean Out Gripper Mechanical Pipe Plugs
|
|
|
|
Clean-Out Gripper® Plug Features.
- Guaranteed to seal any damaged threads
- Made with glass-reinforced ABS plastic
- Black color blends well with cast-iron pipe
- Stainless steel hardware
- NPT sizes, including hard to find 3½”
- Natural rubber threaded o-ring for positive seal
|
 Cherne Clean Out Gripper Mechanical Pipe Plugs |
|
|
|
|
|
|
|
T Handle Gripper Mechanical Pipe Plugs
|
|
|
|
T-Handle Aluminum Gripper® Plug Features:Ideal for long term applications.
- 6″ – 12″ plugs are sized for concrete, clay, and SDR 26 and 35 pipe
- 15″ and 18″ plugs are sized for concrete and clay pipe sizes only
- Available with or without bypass
- Can be used for sewer air pressure tests
- Heavy duty aluminum body and T-handle
- Chemical resistant neoprene o-ring
|
 Cherne T Handle Gripper Mechanical Pipe Plugs |
|
|
|
|
|
|
|
Econ O Grip Mechanical Pipe Plugs
|
|
|
Cost effective method for plugging open ended pipe.
- Works well as a pipe dust cover
- Galvanized metal plates and bolts
- Natural rubber o-ring
|
 Cherne Econ O Grip Mechanical Pipe Plugs |
|
|
|
|
|
|
|
Petro Econ O Grip Mechanical Pipe Plugs
|
|
|
|
Cost effective, chemical-resistant plug.
- Works well as a pipe dust cover
- Stainless steel bolt and plate
- Chemical resistant nitrile rubber
|
 Cherne Petro Econ O Grip Mechanical Pipe Plugs |
|
|
|
|
|
|
|
Sure Grip Mechanical Pipe Plugs
|
|
|
|
Polypropylene construction.
- Fits all types of pipe at nominal sizes
- Permanent or temporary use
- Natural rubber o-ring
- Can be tapped for use with
- Cleanout cover
|
 Cherne Sure Grip Mechanical Pipe Plugs |
|
|
|
|
|
|
|
|
|
|
Kwik N Sure Mechanical Pipe Plugs
|
|
|
Works in all types of pipe Ideal for plugging water line stub-outs
- Designed for high pressure applications
- Natural rubber o-ring
- Wing nut on the .39″-1.25″ sizes
- Hex nut on the 1.5″-5″ sizes
|
 Cherne Kwik N Sure Mechanical Pipe Plugs |
|
|
|
|
|
|
|
Monitor Well Mechanical Pipe Plugs
|
|
|
- Designed to seal monitor wells
- Meets all EPA requirements for locking plugs
- Sized to seal Schedule 40 piping
- 2″ and 4″ sizes can also seal Schedule 5 pipe
- Works with Cherne’s solid brass padlock
- Chemical and petroleum-resistant Estaloc™ plastic top and bottom plates
- Petroleum resistant nitrile o-ring
- Stainless steel carriage bolt
- Yellow chromate-coated locking latch
|
 Cherne Monitor Well Mechanical Pipe Plugs |
|
|
|
|
|
|
|
Lansas
|
|
|
| Wing Nut Mechanical Pipe Plugs |
|
|
- Cast Aluminum Posi-Seal Mechanical Plugs
- High Impact Plastic Mechanical Plugs
- Cast Iron Poli-Seal Mechanical Plugs
|
 Lansas Wing Nut Mechanical Pipe Plugs |
|
