Select Page

Plug Technologies Fat Boy Plugs

ICM is a Proud Dealer for PLUG TECHNOLOGIES, INC

       MAKERS of the  ” FAT BOY PLUG “                                                  

                                                                                                       Single Size Fat Boy Plugster

Our Single Size Plugsters™ are our most economical inflatable plugs.

Our Single Size Plugsters™ can be used in a variety of different applications by municipalities and

contractors including blocking flow and holding pressure.

These inflatable plugs have a size range that covers one nominal pipe size, including 6”, 8”, 10”, and 12” pipes.

Plugsters™ are made of high quality natural rubber making them durable and long lasting.

Plugsters™ have either a 1/4″ or 3/8″ eyebolt for lifting and lowering the plug.

Applications: blocking flow, vacuum testing , air testing (back side only).


                                                             Multi Size Fat Boy Plugster

Our durable Multisize FatBoy Plugster™ works in any pipe that falls inside the plug’s size usage range.

Multisize Plugsters™ are ideal for rental customers because each plug will cover several different pipe

sizes which allows better utilization of the asset.

Multisize Plugsters™are the most economical multisize plugs and are great for contractors or municipalities

that are working with different diameter pipes but do not need air testing capabilities.

Multisize Plugsters™ natural rubber constructions allow our FatBoy Plugs to be  flexible enough to bend

at a 90 degree angle making them very easy to install.

Removable/replaceable 1/4″ tank valve(tire valve) are standard on all Fatboy Plugsters™.

Recommended Applications: Block flow, vacuum testing, air testing (back side only).

ALWAYS BLOCK PLUGS WHEN CONDUCTING AIR TESTS!


                                                              Single Size Fat Boy Guzzler

Our natural rubber single size inflatable Guzzler™plugs are used in a variety of different applications

including blocking flow, bypassing and air testing.

Guzzlers™ are the most versatile and economical inflatable bypass plugs because they can be used

for multiple applications.

Aluminum bypasses make these plugs lightweight and easy to install.

Our plugs come standard with a removable 1/8″ or 1/4″ tank valve (tire valve).

Our 3″ plastic molded two port (1/2″ and 1/4″) Guzzler™ plug makes it easy to convert our Guzzlers™into

Testers™ without purchasing any additional conversion caps/plugs.

Our plugs also include a removable eyebolt (1/4″ or 3/8″) for lifting and lowering the plug.

Applications: blocking flow, air testing and flowthrough bypassing.

ALWAYS BLOCK PLUGS WHEN CONDUCTING AIR TESTS!


Multi Size Fat Boy Guzzler

Our Multi-Sized Guzzler™ plugs can be used for blocking flow, air testing (testing and blocking), vacuum testing and bypassing flow, which makes them our most versatile plugs.

Removable/replaceable 1/8″ or 1/4″ Tank Valve (tire valve) Standard on all Fatboy Guzzlers™.

Natural rubber construction gives our Guzzler™plugs a broad usage range.

Cross-woven fabric gives our plugs strength and durability.

The lightweight aluminum bypasses make our Guzzler ™ plugs lightweight and easy to install.


                                            Multi Size Fat Boy MAX Guzzler

Our Multi-Sized FatBoy Max-Guzzlers™ plugs are specifically designed for bypassing flow.  The large male threaded bypasses make it easy to connect fittings & hoses for pumping and gravity bypassing.

Removable/replaceable inflation assembly has a 1/4” Tank Valve (tire valve) standard on all Fatboy Max-Guzzlers™.

Natural rubber construction gives our Max-Guzzler™ plugs a broad usage range.

Multiple layers of Polyester cord gives our Max-Guzzlers strength and durability.

The lightweight aluminum bypasses make our Max-Guzzler™ plugs lightweight and easy to install.


                                              Multi Size Fat Boy Testers

Our FatBoy Tester™ plugs come standard with 3/4″ and 1/4″ bypasses allowing for  easy transition from a blocking plug to an air testing plug.

Natural rubber construction gives our FatBoy Tester plugs a sizable usage range and long lasting durability.
Removable/replaceable 1/4″ tank valve(tire valve) standard on all Fatboy Testers™.

Cross-woven fabric gives our plugs strength and durability.

The lightweight aluminum bypasses allow our FatBoy Testers™ to be up to 30% lighter than our competitors.

Flexible bypass on all plugs 12-18 & larger.

Applications: Air Testing(testing and blocking side), Blocking Flow, Vacuum Testing.

ALWAYS BLOCK PLUGS WHEN CONDUCTING AIR TESTS!


                                                 Fat Boy Multi Size RPP Rapid Placement Plugs

Our FatBoy Rapid Placement Plugs (RPP)™ plugs are designed to allow the user to quickly and easily install a plug

without getting into the manhole.

No need for confined space entry equipment and procedures saving the user a significant amount of time.

Easy pull pin makes adjusting the angle of the plug during installation very rapid.

Six different pin placements gives six different angle options.

Light weight easy snap together poles make lifting and lowering the RPP™ plugs into and out of different depth manholes quick and easy.

For deeper manholes just snap together more 6’ poles. Recommended Applications: Air Testing (blocking side) Blocking Flow, Vacuum Testing.


                                                  Air Testing Equipment

Tru-Test MAX-AT™ Line Acceptance Kit has everything a contractor needs to perform a sewer line air test(except the air compressor).

The color coded triple hose includes quick disconnect fittings making it easy and fast to properly  connect the hose

to both the Max-Flow™ control panel and the FatBoy Tester™ plug. Our Max-AT™ kits include a set of either 6″-10″ or 8″-12″ multisizeplugs.


                                                                                 Vacuum Testing Equipment

Our lightweight aluminum plate weighs only 45 pounds (38″) and has two lifting handles making our Flat-Max™ easy and comfortable for one person to use.

The Flat-Max™ features a large 4″ vacuum gauge that is angled up to allow you to easily read the gauge from a safe distance.

1″ thick closed cell foam liner makes forming a seal easy and leak free. Seals on both manhole frame and manhole cone surfaces.

Maximum size usage range allows you to seal manhole openings from 18″-36″.

Universal coupling (Chicago Style) makes attaching your air source and the Max-Vac™ Venturi Pump quick and easy. No need for special fittings and hoses.


Easy slide design makes adjusting the height of the bladder quick and easy.

11 pin placements gives the user maximum height adjustment flexibility.

Bladder inflation assembly allows for easy inflation and deflation of the bladder. No tire valves to force the air in and out of your bladder.

The gauges are angled up to allow you to easily read the gauge from a safe distance.

12″ galvanized pipe (3/4″) extension with universal coupling (Chicago Style) allows for quick and easy hook up of the Max-Vac™ Venturi Pump

even when the bladder is lowered into the manhole. No need for special fittings or hoses.


                                                                                            Rope & Inflation Lines

This combination retrieval rope and inflation hose can be used to lift and lower plugs into and out of the manhole

and has fill line for inflating and deflating plugs from outside of the danger zone.

The polypropylene rope has a 3000 lb tensile strength which protects the fill line from being tugged on during the installation of your plugs.

The snap hook makes is easy to attach and detach the retrieval rope from the plug. The fill line comes with a tank valve (tire valve) on one side and an industrial quick disconnect on the other end.

PTI – Recommendation: This fill kit is recommended for single size plugs 12″ and smaller and PTI always recommends that you use a properly functioning gauge to verify the plug inflation pressure.


                                                  Gauges, Valves, Connectors, and plugs


                                              Fat Boy Protective Sleeves

Our FatBoy Max-sleeves™ were designed to be an extra protective layer over our 12”-18” multisize FatBoy™ plugs and all of our larger plug products greatly reduces damage a plug can sustain from pipeline debris, degraded pipe and sharp objects.

Our Max-sleeves™ provide an extra 1/4” layer of rubber which will extend the life of the plugs by protecting the plug’s natural rubber surface during transport and installation.

Our Max–sleeves™ are also very effective in coastal regions which may subject pipe plugs to damage from barnacles and other sea life.

All Max-sleeves™ have four 3/8” eyelets to allow you to ensure the Max-Sleeve™ stays on the plug during transport and installation.

Our Max-sleeves™ are great for rental distributors or anyone who wants to maximize the life and durability of their pipe plugs.

 

Add SI to the end of any sleeve part number and the sleeve will be installed on a matching sized plug (plug sold separately).

Plug installation includes 5/16” coated cable for securing the sleeve to the plugs (15”-30” and larger).